TM 55-1680-320-23 & P
3-24. MICROSWITCH ASSEMBLY (FULL UP) - REPLACE (cont)
l. Remove clamp (36) horn connector (37) by
removing screws (38).
m. Remove heat shrink tubing and electrical brai
from wiring harness (6).
Unscrew connector shell horn connector (37).
Slide shell and insulator away from connector.
Remove pins from connector using a suitable
pin removal tool.
Carefully pull wiring harness (6) through boom
head assembly (39) from actuator end of hous-
GO TO NEXT PAGE