TM 55-1680-320-23 & P
3-19. BRAKE ASSEMBLY - REPLACE (cont)
3-19
b.
c.
d.
Remove side cover assembly (3) by removing
bolts (4, 5) and washers (6). Remove and dis-
card packing (7).
Remove thrust washer (8) from sheave shaft
(9).
Turn brake assembly (10) clockwise to unlock,
and remove from sheave shaft (9).
2. Installation.
a.
b.
c.
d.
Install brake assembly (10), with spring end
out, on sheave shaft (9). Turn brake assembly
counterclockwise to lock in place.
Install thrust washer (8) on sheave shaft (9).
Lubricate packing (7) and install onto side
cover assembly (3). Install side cover assemb-
ly and secure using bolts (4, 5) and washers
(6).
Connect electrical connector
cutter (2).
FOLLOW-ON MAINTENANCE:
(1) to cable
Semite boom head assembly
(Task 2-18)
Conduct operational check
(Task 3-7)
END OF TASK
3-73