TM 55-1680-320-23 & P
2-27. CONTROL PANEL ASSEMBLY - REPLACE (cont)
2-27
2.
CAUTION
Support weight of control panel
assembly during removal to prevent
damage to components.
f. Remove control panel (2) by removing bolts
(12) and washers (13).
Installation.
a.
b.
c.
d.
e.
Position control panel assembly (2) and secure
using bolts (12) and washers (13).
Tighten screws (11) on control panel (2).
Connect boot (10) to control panel (2) and
winch plenum. Secure using bands (8) and
clips (9).
Remove protective caps from receptacles.
Connect electrical connectors (3, 4, 5, 6, 7)
to control panel (2). Lockwire connector (7).
Install control pendant cable (l).
FOLLOW-ON MAINTENANCE:
Conduct performance ckeck
(Task 2-7)
END OF TASK
2-69