Remove all jewelry such as rings, ID tags, watches, and bracelets. If jewelry or tools contact a
battery positive terminal, a direct short will result in instant heating or electric shock, damage to
equipment, and injury to personnel.
Mark or tag wires to ease with reinstallation.
Remove nut and washer at output terminal (Figure 1, Item 2) and disconnect wire.
Release and disconnect electrical connector (Figure 1, Item 3).
Loosen the bottom alternator mounting bolt (Figure 1, Item 5).
Remove the top alternator mount bolt and washer (Figure 1, Item 1).
Slide alternator (Figure 1, Item 4) toward the engine.
Remove engine fan belt (Figure 1, Item 6) from the alternator pulley.
Loosen bracket mount bolt (Figure 1, Item 7) and move bracket up.
Remove bottom alternator mount bolt (Figure 1, Item 5).
Remove alternator (Figure 1, Item 4).
END OF TASK