0032
TM 1-1740-221-13&P&P
ENGINE POWER PACK - (CONTINUED)
9.
Position left side front (Figure 2, Item 5) maintenance mount.
10.
Install bolts (Figure 2, Item 1).
11.
Position left side rear (Figure 2, Item 4) maintenance mount.
12.
Install bolts and washers (Figure 2, Item 2 and 3).
13.
Position right side front (Figure 3, Item 4) maintenance mount.
14.
Install bolts (Figure 3, Item 3).
15.
Position right side rear (Figure 3, Item 5) maintenance mount.
16.
Install bolts and washers (Figure 3, Item 1 and 2).
WARNING
If positioning Engine Power Pack on a workbench, clamp or bolt all maintenance mounts to
prevent injury to personnel or damage to equipment.
Engine Power Pack weighs in excess of 1800 pounds. Ensure workbench is capable of
holding the Power Pack.
NOTE
Power Pack may be lowered to the loor.
NOTE
If replacing engine remove all applicable Line Replaceable Unit s.
17. Lower engine power pack to a level surface.
18. Separate the transmission from the engine assembly (WP 0043).
END OF TASK
INSTALLATION
1. Install the transmission assembly on the engine (WP 0043).
2. Attach lifting device to lifting points on engine power pack (Figure 1).
WARNING
Use extreme caution when lifting heavy components. Never permit any part of the body to be
positioned under and engine, transmission being lifted or suspended. Use suitable lifting
equipment for heavy components. Power pack weight is 1800 lbs.
3.
Lift engine power pack.
4.
Remove all engine power pack maintenance mounts (Figure 2 and Figure 3).
5.
Reinstall bolts (Figure 3, Item 3 and Figure 2, Item 1) into engine mount brackets LH/RH.
NOTE
Ensure right front bottom isolator is installed with lat portion facing the engine.
6.
Lower and secure engine power pack to cradle (WP 0040).
00325