0028
TM 1-1740-221-13&P&P
ACCESSORY ACCESS - (CONTINUED)
NOTE
Ensure proper door function before installing screws, washers and nuts.
3.
Install 2 screws (Figure 4, Item 1), washers (Figure 4, Item 4) and nuts (Figure 4, Item 5) and secure
tool box.
ENGINE COVER SUPPORTS (RH AND LH)
NOTE
Adjusting the height on engine cover support may be necessary for proper engine cover it.
1.
Position LH/RH engine cover support (Figure 5, Item 3).
2.
Install 2 bolts/washers/nuts (Figure 5, Item 1) (1 set per end).
3.
Tighten 2 mount bolts (Figure 5, Item 1).
ENGINE COVER SUPPORT (REAR)
1. Position engine cover support (Figure 6, Item 1).
2. Install 8 bolts/washers/nuts (4 sets per side) (Figure 6, Item 2) and snug.
NOTE
Adjust height of engine cover support (Figure 5, Item 1) to 3/16" below the surface of the deck
surface using a straight edge and tape measure.
3.
Tighten 8 nuts/washers/bolts (4 per side) (Figure 6, Item 2).
CENTER DECK SUPPORT
1. Position center deck support (Figure 6, Item 3).
2. Install 8 bolts/washers/nuts (4 sets per side) (Figure 6, Item 4) and snug.
NOTE
Adjust height of center deck support (Figure 6, Item 3) to 3/16" below the surface of the deck
surface using a straight edge and tape measure.
3.
Tighten 8 nuts/bolts (4 per side) (Figure 6, Item 4).
REAR DECK SUPPORT
1. Position rear deck support (Figure 7, Item 2).
2. Install 8 bolts/washers/nuts (4 sets per side) (Figure 7, Item 1) and snug.
NOTE
Adjust height of rear deck support (Figure 7, Item 2) to 3/16" below the surface of the deck
surface using a straight edge and tape measure.
3.
Tighten 8 nuts/bolts (4 per side) (Figure 7, Item 1).
END OF TASK
END OF WORK PACKAGE
00288