3-17.7 Wheel Assembly Repair, Model 1730-EG-100 (AVUM)- Continued
Never inflate wheel assembly without first checking wheel locknut torques, to insure wheel
locknuts are tightened to specifications. An assembly with missing washers, bolts, nuts or
improperly tightened locknuts could separate under pressure, causing serious injury or death.
Install valve stem core and inflate tube.
Check tire pressure with tire pressure gauge for 75 psi (51.7 kPa). If pressure is incorrect, inflate or deflate tire to
75 psi (51 7 kPa); if pressure is correct, procedure is completed.
END OF TASK