JACK, HYDRAULIC, TRIPOD, TYPE B-5
PART NO. 50K25177 NSN 1730-00-516-2018 EIC: NA
JACK, HYDRAULIC, TRIPOD
PREPARATION FOR STORAGE OR SHIPMENT
Drain the oil from the pump assembly and the cylinder and ram assembly and reżll with a suitable Preservative
Apply suitable preservatives to all exposed metal parts of the tripod hydraulic jack.
Reduce the overall dimensions of the jack with a minimum of disassembly. Wrap the jack and all loose parts
in Barrier Material and seal with Pressure Sensitive Tape.
Pack the jack in a suitable wooden crate.
Make a complete inspection of the jack (WP 0009 00, Service Upon Receipt).
Cleaning and Painting
Clean the jack thoroughly, removing all rust and other forms of corrosion. After cleaning, paint all surfaces where
the paint żlm has been damaged using Paint .
Lubrication and Preservation
Drain the oil from the pump assembly (WP 0014 00, Figure Pump Assembly) and the cylinder and ram
assembly (WP 0015 00, Figure Cylinder and Ram Assembly) and żll with a suitable Preservative Oil.
Cover the jack with a tarpaulin or provide other suitable protection when storing outdoors.
Replace covers on lubricant containers after use and store in a clean dry place. Keep all containers used for
handling oil clean and ready to use.
DEGREASING SOLVENT, MIL-PRF-680
Degreasing solvent, MIL-PRF-680, is combustible and toxic to eyes, skin and respiratory tract.
Wear protective gloves and goggles/face shield. Avoid repeated or prolonged contact. Use