TM 1-1670-260-12&P
0030 00
___________________________________________________________________________________________
QTY - Column (6). The QTY (quantity per figure column) indicates the quantity of the item used in the breakout
shown on the illustration/figure, which is prepared for a functional group, sub-functional group, or an assembly.
AV appearing in this column in lieu of a quantity indicates that the quantity is variable and the quantity may vary
from application to application.
Special Information.
a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description column heading.
Usable on codes are shown as UOC in the Description Column (justified left) on the first line applicable item
description/nomenclature. Un-coded items are applicable to all models.
b. FABRICATION INSTRUCTIONS. Part numbers for bulk materials are referenced in the description column of
the line item entry for the item to be manufactured/fabricated.
c. How To Locate Repair Parts.
(1) First. Determine the assembly group or subassembly group to which the item belongs. This is
necessary since figures are prepared for assembly groups and subassembly groups, and listings are
divided into the same groups.
(2) Second. Find the figure covering the assembly group or subassembly group to which the item belongs
(3) Third. Identify the item on the figure and use the Figure and Item Number Index to find the part
number.
Abbreviations. Not applicable.
END OF WORK PACKAGE
0030 00-5/(0030 00-6 blank)