4-2. TADS TURRET ASSEMBLY REPLACEMENT (cont)
Hydraulic system pressure should be applied
before moving flight controls. Otherwise, sheer
pins may be broken.
The EMER HYD PWR switch must only be
activated long enough to allow the flight
controls to be moved into position, then set to
OFF to avoid bleeding off accumulator
c. Set CPG EMER HYD PWR switch (4) to
d. Place pedal adjust lever (5) in unlocked
position and move foot pedals (6) to
forward limits. Place pedal adjust lever in
e. Move and hold LH foot pedal to forward
limit. Move and hold CPG cyclic stick (7) to
full aft and right limits then set CPG EMER
HYD PWR switch (4) to OFF and release
LH foot pedal and cyclic stick.
f. Set pilot ELEC PWR control panel BATT/
OFF/EXT PWR switch (3) to OFF.
g. Adjust CPG foot pedals to forward limit (TM
h. Completely lower CPG seat (TM 1-1520-