TM 1-1270-476-30
6-15
6-4. BRAKE RELEASE POWER SUPPLY ASSEMBLY REPAIR
This task covers replacement of:
Para
Item
1.
Control panel assembly
2.
Rechargeable batteries BT1 and BT2
recharging
3.
Rechargeable batteries BT1 and BT2
Para
Item
4.
Electronic components assembly A1
5.
Toggle switch S1 or S2
6.
Switch assembly S3
7.
Connector J1 contact
INITIAL SETUP
Tools
Aircraft armament repairman tool set
Aircraft armament technical inspector tool set
Power supply (HP6289A or equivalent)
Materials (appendix C)
Corrosion inhibitive sealing and coating
compound (Item 15)
Solder (Item 46)
Masking tape (Item 59)
Personnel Required
68J Aircraft Fire Control Repairer
66J30 Aircraft Fire Control Technical Inspector
1. CONTROL PANEL ASSEMBLY
REPLACEMENT
REMOVAL
a. Remove control panel assembly (1) by
removing six screws (2) and lifting control
panel assembly (1) straight up from case
(3).
INSTALLATION
b. Slide control panel assembly (1) into case
(3) and secure with six screws (2).
END OF TASK