4-40. TADS ELECTRONIC UNIT (TEU) ASSEMBLY REPAIR (cont)
Do not apply primer to RFI gasket.
f. Apply conducting silicone primer (para 2-6)
to cover groove (2) as thinly as possible.
g. Apply conducting silicone adhesive to cover
groove (2) approximately every 1 1/2
inches (para 2-6).
h. Gently install RFI gasket (1) in cover
groove (2) without stretching. Apply
conducting silicone adhesive to cut ends (3)
and seat splice joint (4) in cover groove (2)
i. Maintain sufficient pressure to keep
bonding surfaces in contact throughout
Cover assembly may be handled after 24
j. Cure for 48 hours at 77 + 10°F (para 2-6).
k. Install cover (1 above).
END OF TASK