TM 1-1270-476-30
4-334
4-40. TADS ELECTRONIC UNIT (TEU) ASSEMBLY REPAIR (cont)
3. POWER SUPPLY ASSEMBLY A14
REPLACEMENT
REMOVAL
a. Remove cover (1 above).
b. Remove power supply assembly A14 (1)
from housing by removing four screws (2)
and washers (3).
c. Disconnect connector A15J13 (4) by
removing screw (5).
d. Disconnect connector A14P1 (6) by
loosening two screwlocks (7).
INSTALLATION
e. Connect connector A15J13 (4) to A14P2
(8) using screw (5).
f. Connect connector A14P1 (6) to A15J12
(9) and tighten two screwlocks (7).
g. Install power supply assembly A14 in
housing (1) using four screws (2) and
washers (3).
h. Install cover (1 above).
END OF TASK