4-38. HARNESS ASSEMBLY REPAIR (cont)
d. Install contact in connector (para 2-5).
e. Install connector in chassis using four
screws (1), washers (2), and connector
f. Install rear assembly cover (para 4-37).
END OF TASK
2. CONNECTOR A1P1 OR A1P2
This procedure can be used to replace
connector A1P1 or A1P2.
a. Remove bottom assembly cover (para
b. Remove CCA A5 (1) using card extractor.
c. Remove fan assembly (2) by removing four
screws (3) and lifting from housing.