TM 1-1270-476-30
4-162
4-9. BRANCHED WIRING HARNESS ASSEMBLY (W10) REPAIR (cont)
5. CONNECTOR P16 REPLACEMENT
REMOVAL
a. Remove screw (1) and two washers (2)
securing connector P16 (3) to controller
circuit card assembly (CCA) A4 (4).
b. Disconnect connector P16 (3) from
connector A4J1.
c. Remove connector P16 (3) from wires
(para 2-5).
INSTALLATION
d. Install replacement connector P16 (3) on
wires (para 2-5).
e. Connect connector P16 (3) to connector
A4J1.
f. Remove old corrosion inhibitive sealing and
coating compound from mounting hardware
(para 2-6).
g. Apply corrosion inhibitive sealing and
coating compound to mounting hardware
(para 2-6). Use class 1A application.
h. Secure connector P16 (3) to CCA A4 (4)
using screw (1) and two washers (2).
END OF TASK