TM 1-1270-476-30
4-119
4-5. NIGHT SENSOR ASSEMBLY (NSA) REPAIR (cont)
18. SPRING TENSION CLIP REPLACEMENT
NOTE
This procedure is for replacing any of the
following spring tension clips:
Capacitor C1 (1)
Capacitor C4 (4)
Capacitor C2 (2)
Capacitor C5 (5)
Capacitor C3 (3)
REMOVAL
a. Remove preamplifier cover (1 above).
b. Remove capacitor (3 above).
NOTE
The spring tension clip for C2 requires one
screw, nut, and washer.
c. Remove spring tension clip by removing
two screws (6), nuts (7), and washers (8).
Retain mounting hardware.
INSTALLATION
d. Remove old corrosion inhibitive sealing and
coating compound from mounting hardware
(para 2-6).
e. Apply corrosion inhibitive sealing and
coating compound to mounting hardware
(para 2-6). Use class 1A application.
f. Install spring tension clip with two screws
(6), nuts (7), and washers (8).
g. Install capacitor (3 above).
h. Install preamplifier cover (1 above).
END OF TASK