4-5. NIGHT SENSOR ASSEMBLY (NSA) REPAIR (cont)
Optics scanner assembly must be manually
supported when capscrews are removed to
prevent damaging wires and flexible
Two people are required to perform steps (2)
thru (5) below.
(2) Manually support optics scanner
assembly (1) and remove four socket
head capscrews (5) and washers (6)
securing it to night sensor assembly.
(3) Disconnect connector W10P11 (7) by
loosening two screwlocks (8).
Be very careful not to stretch, nick, or crease
flexible harness when disconnecting
(4) Disconnect connectors A23P1 (9) and
A23P2 (10) by loosening four
(5) Remove optics scanner assembly and
place in a safe place.