4-5. NIGHT SENSOR ASSEMBLY (NSA) REPAIR (cont)
q. Cut lacing and tying tape (42) securing
W10 wiring harness to cooler/Dewar
assembly cavity at two places. Retain two
rubber cushions between harness and
r. Remove loop clamp (43) by removing
locknut (44), washer (45), and screw (46).
s. Disconnect connector W10P2 (47).
t. Lift and remove sleeve (48) from cooler/
u. Loosen three captive screws (49) securing
cooler/Dewar assembly (50) to night sensor
v. Remove cooler/Dewar assembly from night